diff --git a/stocheck.sh b/stocheck.sh
index 10c9ca6..0da5842 100755
--- a/stocheck.sh
+++ b/stocheck.sh
@@ -119,8 +119,8 @@ while [ -z "$1" ]; do
         for x in {0..4};do
           scan=$(smartctl --scan)
           if [[ -n $(echo $scan | grep /dev/nvme$x) ]] && [[ -n $(ls /sys/block | grep nvme"$x") ]];then
-          argsl=$(smartctl -A /dev/nvme$x | grep -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -e "Warning Comp. Temperature Time" -e "Critical Comp. Temperature Time" -e "Power On Hours" -e "Controller Busy Time" -e "Temperature Sensor 1" -e "Temperature Sensor 2" -o --color=never)
-          argse=$(smartctl -A /dev/nvme$x | grep -e "=== START OF SMART DATA SECTION ===" -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "FAILING_NOW" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -e "Warning Comp. Temperature Time" -e "Critical Comp. Temperature Time" -e "Power On Hours" -e "Controller Busy Time" -e "Temperature Sensor 1" -e "Temperature Sensor 2" --color=never)
+          argsl=$(smartctl -a /dev/nvme$x | grep -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -e "Warning Comp. Temperature Time" -e "Critical Comp. Temperature Time" -e "Power On Hours" -e "Controller Busy Time" -e "Temperature Sensor 1" -e "Temperature Sensor 2" -o --color=never)
+          argse=$(smartctl -a /dev/nvme$x | grep -e "=== START OF SMART DATA SECTION ===" -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "FAILING_NOW" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -e "Warning Comp. Temperature Time" -e "Critical Comp. Temperature Time" -e "Power On Hours" -e "Controller Busy Time" -e "Temperature Sensor 1" -e "Temperature Sensor 2" --color=never)
           if [[ "$argse" =~ "FAILING_NOW" ]];then
             argsl="
             "$argsl"
@@ -142,7 +142,7 @@ while [ -z "$1" ]; do
             done
             echo "$(echo "$argend" | column -t -s "|")"
             echo ""
-            echo smartctl -A /dev/nvme$x | grep -e "Error Information (" -e "No Errors Logged"
+            echo smartctl -a /dev/nvme$x | grep -e "Error Information (" -e "No Errors Logged"
           echo "---------------------------------------------------"
           elif [[ -z $(echo $scan | grep /dev/nvme"$x") ]] && [[ -n $(ls /sys/block | grep nvme"$x") ]];then
             echo "------------------- /dev/nvme"$x" --------------------"