mirror of https://github.com/byReqz/stocheck.git
423 lines
34 KiB
Bash
Executable File
423 lines
34 KiB
Bash
Executable File
#!/bin/bash
|
|
# license: gpl-3
|
|
if [[ ! "$0" =~ "bash" ]];then
|
|
if [[ $(curl -s https://raw.githubusercontent.com/byReqz/stocheck/main/hash) != $(md5sum $0 | cut -c -32) ]] && [[ -z $1 ]] || [[ $(curl -s https://raw.githubusercontent.com/byReqz/stocheck/main/hash) != $(md5sum $0 | cut -c -32) ]] && [[ $1 != "--update" ]] || [[ $(curl -s https://raw.githubusercontent.com/byReqz/stocheck/main/hash) != $(md5sum $0 | cut -c -32) ]] && [[ $1 != "-u" ]];then
|
|
echo "#############################################"
|
|
echo -e "\e[4mnote: newer version detected, use -u to update\e[0m"
|
|
echo "#############################################"
|
|
echo ""
|
|
fi
|
|
fi
|
|
if [[ $(whoami) != "root" ]] && [[ "$1" != "-u" ]];then
|
|
echo "-----------------------------------------"
|
|
echo "ERROR: This script should be run as root."
|
|
echo "-----------------------------------------"
|
|
exit
|
|
fi
|
|
while [ -z "$1" ]; do
|
|
raidcheck="$(lspci | grep -E 'LSI|3ware|Adaptec|Smartraid')"
|
|
if [[ -z "$raidcheck" ]];then
|
|
if [[ -n $(ls /proc | grep -e "mdstat") ]] && [[ -n $(grep -e "md" /proc/mdstat) ]];then
|
|
raidlist=$(grep -e "md" /proc/mdstat | cut -d " " -f 1)
|
|
raidlist2=$(echo "$raidlist" | wc -l)
|
|
df=$(df -Th)
|
|
lsbl=$(lsblk -f | tail -n +2 | sort -u)
|
|
mdadmconf=$(cat /proc/mdstat)
|
|
if [[ "$raidlist2" == "1" ]];then
|
|
echo -e "detected "$raidlist2" raid array"
|
|
else
|
|
echo -e "detected "$raidlist2" raid arrays"
|
|
fi
|
|
echo -e "--------------------------------------------------"
|
|
for ((x=1;x<=raidlist2;x++)); do
|
|
raid=$(echo "$raidlist" | sed -n "$x"p)
|
|
if [[ -z $(echo "$lsbl" | grep -e "%") ]];then
|
|
raidts="unmounted"
|
|
fi
|
|
if [[ "$raidts" == "unmounted" ]];then
|
|
raidfs=$(echo "$lsbl" | grep "$raid" | tr -s ' ' | cut -d " " -f 3)
|
|
raiduuid=$(echo "$lsbl" | grep "$raid" | tr -s ' ' | cut -d " " -f 5)
|
|
raidstate=$(echo "$mdadmconf" | grep -e "$raid" | cut -d " " -f 4)
|
|
raiddrives=$(echo "$mdadmconf" | grep -e "$raid" | cut -c 6- | grep -o -E "sd[a-z][0-9]|nvme[0-9]n[0-9]p[0-9]" | tr "\n" " ")
|
|
echo -e "\033[1mArray:\033[0m "$raid" \033[1mType:\033[0m "$raidstate" \033[1mFS:\033[0m "$raidfs""
|
|
echo -e "\033[1mMembers:\033[0m "$raiddrives""
|
|
echo -e "\033[1mState:\033[0m "$raidts" \033[1mP-UUID:\033[0m "$raiduuid""
|
|
echo -e ""
|
|
else
|
|
raidfs=$(echo "$lsbl" | grep "$raid" | tr -s ' ' | cut -d " " -f 3)
|
|
raidper=$(echo "$lsbl" | grep "$raid" | tr -s ' ' | cut -d " " -f 6)
|
|
raidmp=$(echo "$lsbl" | grep "$raid" | tr -s ' ' | cut -d " " -f 7)
|
|
raiduuid=$(echo "$lsbl" | grep "$raid" | tr -s ' ' | cut -d " " -f 5)
|
|
raidstate=$(echo "$mdadmconf" | grep -e "$raid" | cut -d " " -f 4)
|
|
raiddrives=$(echo "$mdadmconf" | grep -e "$raid" | cut -c 6- | grep -o -E "sd[a-z][0-9]|nvme[0-9]n[0-9]p[0-9]" | tr "\n" " ")
|
|
echo -e "\033[1mArray:\033[0m "$raid" \033[1mType:\033[0m "$raidstate" \033[1mSize:\033[0m "$raidts" \033[1m%:\033[0m "$raidper""
|
|
echo -e "\033[1mMembers:\033[0m "$raiddrives""
|
|
echo -e "\033[1mState:\033[0m "mounted" \033[1mFilesystem:\033[0m "$raidfs" \033[1mMountpoint:\033[0m "$raidmp""
|
|
echo -e "\033[1mP-UUID:\033[0m "$raiduuid""
|
|
echo -e ""
|
|
fi
|
|
done
|
|
if [[ "$mdadmconf" =~ "recovery" ]];then
|
|
echo -e "\033[1mWarning:\033[0m one or more arrays are rebuilding right now"
|
|
elif [[ "$mdadmconf" =~ "resync" ]];then
|
|
echo -e "\033[1mWarning:\033[0m one or more arrays are resyncing right now"
|
|
fi
|
|
echo -e "--------------------------------------------------"
|
|
echo ""
|
|
fi
|
|
if [[ -n $(ls /sys/block | grep sd) ]];then
|
|
echo "=== sata drive check: ($(ls -l /sys/block | grep sd | wc -l) found) ==="
|
|
for x in {a..z};do
|
|
scan=$(smartctl --scan)
|
|
if [[ -n $(echo $scan | grep /dev/sd$x) ]] && [[ -n $(ls /sys/block | grep sd"$x") ]];then
|
|
argsl=$(smartctl -A /dev/sd$x | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -e "Current_Pending_Sector" -e "Runtime_Bad_Block" -e "End-to-End_Error" -e "UDMA_CRC_Error_Count" -e "Wear_Leveling_Count" -o --color=never)
|
|
argse=$(smartctl -A /dev/sd$x | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -e "FAILING_NOW" -e "Current_Pending_Sector" -e "Runtime_Bad_Block" -e "End-to-End_Error" -e "UDMA_CRC_Error_Count" -e "Wear_Leveling_Count" --color=never)
|
|
if [[ "$argse" =~ "FAILING_NOW" ]];then
|
|
argsl="
|
|
"$argsl"
|
|
"$(echo $argse | grep -e "FAILING_NOW" | tr -s ' ' | cut -c 2- | cut -d ' ' -f 2)"
|
|
"
|
|
fi
|
|
argsm=$(echo "$argsl" | wc -l)
|
|
echo "------------------- /dev/sd"$x" --------------------"
|
|
smartctl -i /dev/sd$x | grep -e "=== START OF INFORMATION SECTION ===" -e "Device Model:" -e "Serial Number:" -e "Firmware Version:" -e "User Capacity:" -e "SMART support is:" -e "Sector Size:" -e "Rotation Rate:" -e "Multi_Zone_Error_Rate"
|
|
echo ""
|
|
echo "=== START OF SELF-ASSESSMENT TEST RESULT ==="
|
|
smartctl -H /dev/sd$x | grep -e "SMART overall-health self-assessment test result:"
|
|
echo ""
|
|
argend=$(echo -e "\e[4mAttribute\e[0m|\e[4mValue (Raw)\e[0m|\e[4mWorst\e[0m|\e[4mThresh\e[0m|\e[4mType\e[0m|\e[4mUpdated\e[0m|\e[4mFailed\e[0m")
|
|
for ((z=1;z<=argsm;z++)); do
|
|
arg=$(echo "$argsl" | sed -n "$z"p)
|
|
value=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 4)
|
|
worst=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 5)
|
|
thresh=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 6)
|
|
type=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 7)
|
|
updated=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 8)
|
|
failed=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 9)
|
|
raw=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 10)
|
|
argend=""$argend"
|
|
"$(echo ""$arg"|"$value" ("$raw")|"$worst"|"$thresh"|"$type"|"$updated"|"$failed"")""
|
|
done
|
|
echo "$(echo "$argend" | column -t -s "|")"
|
|
echo "-------------------------------------------------"
|
|
elif [[ -z $(echo $scan | grep /dev/sd"$x") ]] && [[ -n $(ls /sys/block | grep sd"$x") ]];then
|
|
echo "------------------- /dev/sd"$x" --------------------"
|
|
echo -e "drive is not responding"
|
|
echo "-------------------------------------------------"
|
|
fi
|
|
done
|
|
fi
|
|
if [[ -n $(ls /dev | grep nvme) ]];then
|
|
echo "=== nvme drive check: ($(ls -l /sys/block | grep nvme | wc -l) found) ==="
|
|
for x in {0..24};do
|
|
scan=$(smartctl --scan)
|
|
if [[ -n $(echo $scan | grep /dev/nvme$x) ]] && [[ -n $(ls /sys/block | grep nvme"$x") ]];then
|
|
argsl=$(smartctl -a /dev/nvme$x | grep -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -e "Warning Comp. Temperature Time" -e "Critical Comp. Temperature Time" -e "Power On Hours" -e "Controller Busy Time" -e "Temperature Sensor 1" -e "Temperature Sensor 2" -e "Wear_Leveling_Count" -e "Available Spare:" -e "Critical Warning:" -e "Available Spare Threshold:" -o --color=never)
|
|
argse=$(smartctl -a /dev/nvme$x | grep -e "=== START OF SMART DATA SECTION ===" -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "FAILING_NOW" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -e "Warning Comp. Temperature Time" -e "Critical Comp. Temperature Time" -e "Power On Hours" -e "Controller Busy Time" -e "Wear_Leveling_Count" -e "Temperature Sensor 1" -e "Temperature Sensor 2" -e "Available Spare:" -e "Critical Warning:" -e "Available Spare Threshold:" --color=never)
|
|
if [[ "$argse" =~ "FAILING_NOW" ]];then
|
|
argsl="
|
|
"$argsl"
|
|
"$(echo $argse | grep -e "FAILING_NOW" | tr -s ' ' | cut -c 2- | cut -d ' ' -f 2)"
|
|
"
|
|
fi
|
|
argsm=$(echo "$argsl" | wc -l)
|
|
echo "------------------- /dev/nvme$x --------------------"
|
|
smartctl -i /dev/nvme$x | grep -e "=== START OF INFORMATION SECTION ===" -e "Device Model:" -e "Serial Number:" -e "Firmware Version:" -e "Multi_Zone_Error_Rate" -e "Model Number:" -e "Total NVM Capacity:" -e "NVMe Version" -e "Available Spare:" -e "Available Spare Threshold:" -e "Controller Busy Time" -e "Unsafe Shutdowns" -e "Namespace 1 Utilization"
|
|
echo ""
|
|
echo "=== START OF SELF-ASSESSMENT TEST RESULT ==="
|
|
smartctl -H /dev/nvme$x | grep -e "SMART overall-health self-assessment test result:"
|
|
echo ""
|
|
argend="$(echo -e "\e[4mAttribute\e[0m|\e[4mValue\e[0m")"
|
|
for ((z=1;z<=argsm;z++)); do
|
|
arg="$(echo "$argsl" | sed -n "$z"p)"
|
|
value="$(echo "$argse" | grep -e "$arg" | xargs | cut -d ':' -f 2- | cut -c 2-)"
|
|
argend=""$argend"
|
|
"$arg"|"$value""
|
|
done
|
|
echo "$(echo "$argend" | column -t -s "|")"
|
|
echo ""
|
|
echo smartctl -a /dev/nvme$x | grep -e "Error Information (" -e "No Errors Logged"
|
|
echo "---------------------------------------------------"
|
|
elif [[ -z $(echo $scan | grep /dev/nvme"$x") ]] && [[ -n $(ls /sys/block | grep nvme"$x") ]];then
|
|
echo "------------------- /dev/nvme"$x" --------------------"
|
|
echo -e "drive is not responding"
|
|
echo "-------------------------------------------------"
|
|
fi
|
|
done
|
|
fi
|
|
if [[ -n $(ls /sys/block | grep nvme) ]] || [[ -n $(ls /sys/block | grep sd) ]] || [[ ! "$raidcheck" =~ "3ware" ]] && [[ "$raidcheck" =~ "adaptec" ]] && [[ "$raidcheck" =~ "lsi" ]] && [[ -n $(ls /sys/block | grep sd) ]] && [[ -n $(ls /dev | grep nvme) ]];then
|
|
echo "no drives detected"
|
|
exit
|
|
fi
|
|
exit
|
|
elif [[ -n $(echo "$raidcheck" | grep -e "3ware") ]];then
|
|
echo "3ware raid-controller detected"
|
|
dreiware=$(tw_cli show | grep c | cut -c -3)
|
|
echo "------------------- 3ware controller: $dreiware --------------------"
|
|
tw_cli /$dreiware show
|
|
echo "---------------------------------------------------------------"
|
|
dreiwareversion=$(ls /dev/ | grep t)
|
|
if [[ -n $(echo $dreiwareversion | grep twe0) ]];then
|
|
echo "6000/7000/8000 series controller detected"
|
|
echo "---------------------------------------------------------------"
|
|
dreiwaredrives=$(tw_cli /$dreiware show | grep p | cut -c -3)
|
|
echo "=== sata drive check: ==="
|
|
for x in {0..20};do
|
|
if [[ -n $(echo $dreiwaredrives | grep p$x) ]];then
|
|
argsl=$(smartctl -A -d 3ware,p$x /dev/twe0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -e "Current_Pending_Sector" -e "Runtime_Bad_Block" -e "End-to-End_Error" -e "UDMA_CRC_Error_Count" -e "Wear_Leveling_Count" -o --color=never)
|
|
argse=$(smartctl -A -d 3ware,p$x /dev/twe0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -e "Current_Pending_Sector" -e "Runtime_Bad_Block" -e "End-to-End_Error" -e "UDMA_CRC_Error_Count" -e "Wear_Leveling_Count" --color=never)
|
|
if [[ "$argse" =~ "FAILING_NOW" ]];then
|
|
argsl="
|
|
"$argsl"
|
|
"$(echo $argse | grep -e "FAILING_NOW" | tr -s ' ' | cut -c 2- | cut -d ' ' -f 2)"
|
|
"
|
|
fi
|
|
argsm=$(echo "$argsl" | wc -l)
|
|
echo "------------------- p$x --------------------"
|
|
smartctl -i -d 3ware,p$x /dev/twe0 | grep -e "=== START OF INFORMATION SECTION ===" -e "Device Model:" -e "Serial Number:" -e "Firmware Version:" -e "User Capacity:" -e "SMART support is:" -e "Sector Size:" -e "Rotation Rate:" -e "Multi_Zone_Error_Rate"
|
|
echo ""
|
|
echo "=== START OF SELF-ASSESSMENT TEST RESULT ==="
|
|
smartctl -H -d 3ware,p$x /dev/twe0 | grep -e "SMART overall-health self-assessment test result:"
|
|
echo ""
|
|
argend=$(echo -e "\e[4mAttribute\e[0m|\e[4mValue (Raw)\e[0m|\e[4mWorst\e[0m|\e[4mThresh\e[0m|\e[4mType\e[0m|\e[4mUpdated\e[0m|\e[4mFailed\e[0m")
|
|
for ((z=1;z<=argsm;z++)); do
|
|
arg=$(echo "$argsl" | sed -n "$z"p)
|
|
value=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 4)
|
|
worst=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 5)
|
|
thresh=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 6)
|
|
type=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 7)
|
|
updated=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 8)
|
|
failed=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 9)
|
|
raw=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 10)
|
|
argend=""$argend"
|
|
"$(echo ""$arg"|"$value" ("$raw")|"$worst"|"$thresh"|"$type"|"$updated"|"$failed"")""
|
|
done
|
|
echo "$(echo "$argend" | column -t -s "|")"
|
|
echo "-------------------------------------------"
|
|
exit
|
|
fi
|
|
done
|
|
elif [[ -n $(echo $dreiwareversion | grep twa0) ]];then
|
|
echo "9000 series controller detected"
|
|
echo "---------------------------------------------------------------"
|
|
dreiwaredrives=$(tw_cli /$dreiware show | grep p | cut -c -3)
|
|
echo "=== sata drive check: ==="
|
|
for x in {0..20};do
|
|
if [[ -n $(echo $dreiwaredrives | grep p$x) ]];then
|
|
argsl=$(smartctl -A -d 3ware,p$x /dev/twa0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -e "Current_Pending_Sector" -e "Runtime_Bad_Block" -e "End-to-End_Error" -e "UDMA_CRC_Error_Count" -e "Wear_Leveling_Count" -o --color=never)
|
|
argse=$(smartctl -A -d 3ware,p$x /dev/twa0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -e "Current_Pending_Sector" -e "Runtime_Bad_Block" -e "End-to-End_Error" -e "UDMA_CRC_Error_Count" -e "Wear_Leveling_Count" --color=never)
|
|
if [[ "$argse" =~ "FAILING_NOW" ]];then
|
|
argsl="
|
|
"$argsl"
|
|
"$(echo $argse | grep -e "FAILING_NOW" | tr -s ' ' | cut -c 2- | cut -d ' ' -f 2)"
|
|
"
|
|
fi
|
|
argsm=$(echo "$argsl" | wc -l)
|
|
echo "------------------- p$x --------------------"
|
|
smartctl -i -d 3ware,p$x /dev/twa0 | grep -e "=== START OF INFORMATION SECTION ===" -e "Device Model:" -e "Serial Number:" -e "Firmware Version:" -e "User Capacity:" -e "SMART support is:" -e "Sector Size:" -e "Rotation Rate:" -e "Multi_Zone_Error_Rate"
|
|
echo ""
|
|
echo "=== START OF SELF-ASSESSMENT TEST RESULT ==="
|
|
smartctl -H -d 3ware,p$x /dev/twa0 | grep -e "SMART overall-health self-assessment test result:"
|
|
echo ""
|
|
argend=$(echo -e "\e[4mAttribute\e[0m|\e[4mValue (Raw)\e[0m|\e[4mWorst\e[0m|\e[4mThresh\e[0m|\e[4mType\e[0m|\e[4mUpdated\e[0m|\e[4mFailed\e[0m")
|
|
for ((z=1;z<=argsm;z++)); do
|
|
arg=$(echo "$argsl" | sed -n "$z"p)
|
|
value=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 4)
|
|
worst=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 5)
|
|
thresh=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 6)
|
|
type=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 7)
|
|
updated=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 8)
|
|
failed=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 9)
|
|
raw=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 10)
|
|
argend=""$argend"
|
|
"$(echo ""$arg"|"$value" ("$raw")|"$worst"|"$thresh"|"$type"|"$updated"|"$failed"")""
|
|
done
|
|
echo "$(echo "$argend" | column -t -s "|")"
|
|
echo "-------------------------------------------"
|
|
else
|
|
exit
|
|
fi
|
|
done
|
|
elif [[ -n $(echo $dreiwareversion | grep twl0) ]];then
|
|
echo "9750 series controller detected"
|
|
echo "---------------------------------------------------------------"
|
|
dreiwaredrives=$(tw_cli /$dreiware show | grep p | cut -c -3)
|
|
echo "=== sata drive check: ==="
|
|
for x in {0..20};do
|
|
if [[ -n $(echo $dreiwaredrives | grep p$x) ]];then
|
|
argsl=$(smartctl -A -d 3ware,p$x /dev/twl0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -e "Current_Pending_Sector" -e "Runtime_Bad_Block" -e "End-to-End_Error" -e "UDMA_CRC_Error_Count" -e "Wear_Leveling_Count" -o --color=never)
|
|
argse=$(smartctl -A -d 3ware,p$x /dev/twl0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -e "Current_Pending_Sector" -e "FAILING_NOW" -e "Runtime_Bad_Block" -e "End-to-End_Error" -e "UDMA_CRC_Error_Count" -e "Wear_Leveling_Count" --color=never)
|
|
if [[ "$argse" =~ "FAILING_NOW" ]];then
|
|
argsl="
|
|
"$argsl"
|
|
"$(echo $argse | grep -e "FAILING_NOW" | tr -s ' ' | cut -c 2- | cut -d ' ' -f 2)"
|
|
"
|
|
fi
|
|
argsm=$(echo "$argsl" | wc -l)
|
|
echo "------------------- p$x --------------------"
|
|
smartctl -i -d 3ware,p$x /dev/twl0 | grep -e "=== START OF INFORMATION SECTION ===" -e "Device Model:" -e "Serial Number:" -e "Firmware Version:" -e "User Capacity:" -e "SMART support is:" -e "Sector Size:" -e "Rotation Rate:" -e "Multi_Zone_Error_Rate"
|
|
echo ""
|
|
echo "=== START OF SELF-ASSESSMENT TEST RESULT ==="
|
|
smartctl -H -d 3ware,p$x /dev/twl0 | grep -e "SMART overall-health self-assessment test result:"
|
|
echo ""
|
|
argend=$(echo -e "\e[4mAttribute\e[0m|\e[4mValue (Raw)\e[0m|\e[4mWorst\e[0m|\e[4mThresh\e[0m|\e[4mType\e[0m|\e[4mUpdated\e[0m|\e[4mFailed\e[0m")
|
|
for ((z=1;z<=argsm;z++)); do
|
|
arg=$(echo "$argsl" | sed -n "$z"p)
|
|
value=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 4)
|
|
worst=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 5)
|
|
thresh=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 6)
|
|
type=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 7)
|
|
updated=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 8)
|
|
failed=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 9)
|
|
raw=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 10)
|
|
argend=""$argend"
|
|
"$(echo ""$arg"|"$value" ("$raw")|"$worst"|"$thresh"|"$type"|"$updated"|"$failed"")""
|
|
done
|
|
echo "$(echo "$argend" | column -t -s "|")"
|
|
echo "-------------------------------------------"
|
|
else
|
|
exit
|
|
fi
|
|
done
|
|
else
|
|
echo "reading smart values for this controller series is not supported"
|
|
exit
|
|
fi
|
|
elif [[ -n $(echo "$raidcheck" | grep -e "Adaptec") ]];then
|
|
echo "adaptec raid-controller detected"
|
|
echo "--------------------- adaptec controller ----------------------"
|
|
arcconf GETCONFIG 1 LD
|
|
echo "---------------------------------------------------------------"
|
|
echo "=== sata drive check: ==="
|
|
echo "-------------------------------------------"
|
|
arcconf getconfig 1 pd|egrep "Device #|State\>|Reported Location|Reported Channel|S.M.A.R.T. warnings"
|
|
echo "-------------------------------------------"
|
|
echo "show all smart values? (y/N)"
|
|
read yn
|
|
if [[ $yn == "y" ]] || [[ $yn == "Y" ]] || [[ $yn == "yes" ]];then
|
|
for x in {1..20};do
|
|
if [[ -n $(echo $dreiwaredrives | grep p$x) ]];then
|
|
argsl=$(smartctl -A -d sat /dev/sg$x | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -e "Current_Pending_Sector" -e "Runtime_Bad_Block" -e "End-to-End_Error" -e "UDMA_CRC_Error_Count" -e "Wear_Leveling_Count" -o --color=never)
|
|
argse=$(smartctl -A -d sat /dev/sg$x | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -e "Current_Pending_Sector" -e "Runtime_Bad_Block" -e "End-to-End_Error" -e "UDMA_CRC_Error_Count" -e "Wear_Leveling_Count" --color=never)
|
|
if [[ "$argse" =~ "FAILING_NOW" ]];then
|
|
argsl="
|
|
"$argsl"
|
|
"$(echo $argse | grep -e "FAILING_NOW" | tr -s ' ' | cut -c 2- | cut -d ' ' -f 2)"
|
|
"
|
|
fi
|
|
argsm=$(echo "$argsl" | wc -l)
|
|
echo "------------------- sg$x --------------------"
|
|
smartctl -i -d sat /dev/sg$x | grep -e "=== START OF INFORMATION SECTION ===" -e "Device Model:" -e "Serial Number:" -e "Firmware Version:" -e "User Capacity:" -e "SMART support is:" -e "Sector Size:" -e "Rotation Rate:" -e "Multi_Zone_Error_Rate"
|
|
echo ""
|
|
echo "=== START OF SELF-ASSESSMENT TEST RESULT ==="
|
|
smartctl -H -d sat /dev/sg$x | grep -e "SMART overall-health self-assessment test result:"
|
|
echo ""
|
|
argend=$(echo -e "\e[4mAttribute\e[0m|\e[4mValue (Raw)\e[0m|\e[4mWorst\e[0m|\e[4mThresh\e[0m|\e[4mType\e[0m|\e[4mUpdated\e[0m|\e[4mFailed\e[0m")
|
|
for ((z=1;z<=argsm;z++)); do
|
|
arg=$(echo "$argsl" | sed -n "$z"p)
|
|
value=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 4)
|
|
worst=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 5)
|
|
thresh=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 6)
|
|
type=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 7)
|
|
updated=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 8)
|
|
failed=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 9)
|
|
raw=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 10)
|
|
argend=""$argend"
|
|
"$(echo ""$arg"|"$value" ("$raw")|"$worst"|"$thresh"|"$type"|"$updated"|"$failed"")""
|
|
done
|
|
echo "$(echo "$argend" | column -t -s "|")"
|
|
echo "-------------------------------------------"
|
|
else
|
|
exit
|
|
fi
|
|
done
|
|
else
|
|
exit
|
|
fi
|
|
elif [[ -n $(echo "$raidcheck" | grep -e "LSI") ]];then
|
|
echo "lsi raid-controller detected"
|
|
echo "----------------------- LSI controller ------------------------"
|
|
megacli -LDInfo -Lall -Aall
|
|
echo "---------------------------------------------------------------"
|
|
echo "=== sata drive check: ==="
|
|
echo "-------------------------------------------"
|
|
megacli -PDList -aAll | egrep "Enclosure Device ID:|Slot Number:|Inquiry Data:|Error Count:|state"
|
|
echo "-------------------------------------------"
|
|
echo "show all smart values? (y/N)"
|
|
read yn
|
|
if [[ $yn == "y" ]] || [[ $yn == "Y" ]] || [[ $yn == "yes" ]];then
|
|
scan=$(megacli -pdlist -a0 | grep "Device Id")
|
|
p1=$(head -n 1 $scan | cut -c 12-)
|
|
pz=$(tail -n 1 $scan | cut -c 12-)
|
|
for x in {$p1..$pz};do
|
|
if [[ -n $(echo $scan | grep -E "$x") ]] && [[ -n $(ls /sys/block | grep "$x") ]];then
|
|
argsl=$(smartctl -A -d sat+megaraid,$x /dev/sda | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -e "Current_Pending_Sector" -e "Runtime_Bad_Block" -e "End-to-End_Error" -e "UDMA_CRC_Error_Count" -e "Wear_Leveling_Count" -o --color=never)
|
|
argse=$(smartctl -A -d sat+megaraid,$x /dev/sda | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -e "Current_Pending_Sector" -e "Runtime_Bad_Block" -e "End-to-End_Error" -e "UDMA_CRC_Error_Count" -e "Wear_Leveling_Count" --color=never)
|
|
if [[ "$argse" =~ "FAILING_NOW" ]];then
|
|
argsl="
|
|
"$argsl"
|
|
"$(echo $argse | grep -e "FAILING_NOW" | tr -s ' ' | cut -c 2- | cut -d ' ' -f 2)"
|
|
"
|
|
fi
|
|
argsm=$(echo "$argsl" | wc -l)
|
|
echo "------------------- p$x --------------------"
|
|
smartctl -i -d sat+megaraid,$x /dev/sda | grep -e "=== START OF INFORMATION SECTION ===" -e "Device Model:" -e "Serial Number:" -e "Firmware Version:" -e "User Capacity:" -e "SMART support is:" -e "Sector Size:" -e "Rotation Rate:" -e "Multi_Zone_Error_Rate"
|
|
echo ""
|
|
echo "=== START OF SELF-ASSESSMENT TEST RESULT ==="
|
|
smartctl -H -d sat+megaraid,$x /dev/sda | grep -e "SMART overall-health self-assessment test result:"
|
|
echo ""
|
|
argend=$(echo -e "\e[4mAttribute\e[0m|\e[4mValue (Raw)\e[0m|\e[4mWorst\e[0m|\e[4mThresh\e[0m|\e[4mType\e[0m|\e[4mUpdated\e[0m|\e[4mFailed\e[0m")
|
|
for ((z=1;z<=argsm;z++)); do
|
|
arg=$(echo "$argsl" | sed -n "$z"p)
|
|
value=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 4)
|
|
worst=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 5)
|
|
thresh=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 6)
|
|
type=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 7)
|
|
updated=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 8)
|
|
failed=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 9)
|
|
raw=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 10)
|
|
argend=""$argend"
|
|
"$(echo ""$arg"|"$value" ("$raw")|"$worst"|"$thresh"|"$type"|"$updated"|"$failed"")""
|
|
done
|
|
echo "$(echo "$argend" | column -t -s "|")"
|
|
echo "-------------------------------------------------"
|
|
else
|
|
exit
|
|
fi
|
|
done
|
|
else
|
|
exit
|
|
fi
|
|
else
|
|
exit
|
|
fi
|
|
done
|
|
while [ -n "$1" ]; do
|
|
if [[ $1 == "-u" ]] || [[ "$1" == "--update" ]];then
|
|
if [[ $(curl -s https://raw.githubusercontent.com/byReqz/stocheck/main/hash) != $(md5sum $0 | cut -c -32) ]];then
|
|
wget -O $0 --quiet "https://raw.githubusercontent.com/byReqz/stocheck/main/stocheck.sh"
|
|
echo "#############################################"
|
|
echo -e "\e[4mscript has been updated to the newest version\e[0m"
|
|
echo "#############################################"
|
|
exit
|
|
elif [[ $(curl -s https://raw.githubusercontent.com/byReqz/stocheck/main/hash) = $(md5sum $0 | cut -c -32) ]];then
|
|
echo "#############################################"
|
|
echo "no newer version found"
|
|
echo "#############################################"
|
|
exit
|
|
fi
|
|
elif [[ "$1" == "--help" ]] || [[ "$1" == "-h" ]];then
|
|
echo "Usage: $0 (options)"
|
|
echo "Options:"
|
|
echo " -u/--update -- update the script"
|
|
echo " -h/--help -- show help"
|
|
exit
|
|
else
|
|
echo "Usage: $0 (options)"
|
|
echo "Options:"
|
|
echo " -u/--update -- update the script"
|
|
echo " -h/--help -- show help"
|
|
exit
|
|
fi
|
|
done
|