1
0
mirror of https://github.com/byReqz/stocheck.git synced 2024-11-14 11:43:15 +00:00

added lsi, adaptec support and fixes

This commit is contained in:
Nils 2021-01-24 01:30:07 +00:00 committed by GitHub
parent 25aa763d83
commit 85f595ebab
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

View File

@ -20,6 +20,9 @@ while [ ! -n "$1" ]; do
echo "-------------------------------------------------"
fi
done
if [[ -z $(ls /dev | grep nvme) ]];then
exit
fi
fi
if [[ -n $(ls /dev | grep nvme) ]];then
echo "=== nvme drive check: ==="
@ -31,12 +34,15 @@ while [ ! -n "$1" ]; do
echo "---------------------------------------------------"
fi
done
if [[ -z $(ls /dev | grep sd) ]];then
exit
fi
fi
if [[ -n $(ls /dev | grep nvme) ]] || if [[ -n $(ls /sys/block | grep sd) ]];then
if [[ -n $(ls /dev | grep nvme) ]] || [[ -n $(ls /sys/block | grep sd) ]] || [[ ! "$raidcheck" =~ "3ware" ]] && [[ "$raidcheck" =~ "adaptec" ]] && [[ "$raidcheck" =~ "lsi" ]] && [[ -n $(ls /sys/block | grep sd) ]] && [[ -n $(ls /dev | grep nvme) ]];then
echo "no drives detected"
exit
fi
fi
if [[ "$raidcheck" =~ "3ware" ]];then
elif [[ "$raidcheck" =~ "3ware" ]];then
echo "3ware raid-controller detected"
dreiware=$(tw_cli show | grep c | cut -c -3)
echo "------------------- 3ware controller: $dreiware --------------------"
@ -53,6 +59,8 @@ while [ ! -n "$1" ]; do
echo "------------------- p$x --------------------"
smartctl -a -d 3ware,p$x /dev/twe0
echo "-------------------------------------------"
else
exit
fi
done
elif [[ -n $(echo $dreiwareversion | grep twa0) ]];then
@ -65,6 +73,8 @@ while [ ! -n "$1" ]; do
echo "------------------- p$x --------------------"
smartctl -a -d 3ware,p$x /dev/twa0
echo "-------------------------------------------"
else
exit
fi
done
elif [[ -n $(echo $dreiwareversion | grep twl0) ]];then
@ -77,15 +87,56 @@ while [ ! -n "$1" ]; do
echo "------------------- p$x --------------------"
smartctl -a -d 3ware,p$x /dev/twl0
echo "-------------------------------------------"
else
exit
fi
done
else
echo "reading smart values for this controller series is not supported"
exit
fi
#adding further controllers here
elif [[ "$raidcheck" =~ "adaptec" ]];then
echo "adaptec raid-controller detected"
echo "------------------- adaptec controller --------------------"
arcconf GETCONFIG 1 LD
echo "---------------------------------------------------------------"
echo "=== sata drive check: ==="
echo "-------------------....--------------------"
arcconf getconfig 1 pd|egrep "Device #|State\>|Reported Location|Reported Channel|S.M.A.R.T. warnings"
echo "-------------------------------------------"
for x in {1..20};do
if [[ -n $(echo $dreiwaredrives | grep p$x) ]];then
echo "------------------- sg$x --------------------"
smartctl -d sat -a /dev/sg$x
echo "-------------------------------------------"
else
exit
fi
done
elif [[ "$raidcheck" =~ "lsi" ]];then
echo "lsi raid-controller detected"
echo "------------------- adaptec controller --------------------"
megacli -LDInfo -Lall -Aall
echo "---------------------------------------------------------------"
echo "=== sata drive check: ==="
echo "-------------------....--------------------"
megacli -PDList -aAll | egrep "Enclosure Device ID:|Slot Number:|Inquiry Data:|Error Count:|state"
echo "-------------------------------------------"
for x in {a..z};do
scan=$(smartctl --scan)
if [[ -n $(echo $scan | grep /dev/sd$x) ]];then
echo "------------------- /dev/sd$x --------------------"
smartctl -d sat+megaraid,4 -a /dev/sd$x
echo "-------------------------------------------------"
else
exit
fi
done
else
exit
fi
done
exit
while [ ! -z "$1" ]; do
if [[ $1 == "-u" ]] || [[ "$1" == "--update" ]];then
if [[ $(curl -s https://raw.githubusercontent.com/byReqz/stocheck/main/stocheck.sh | md5sum | cut -c -32) != $(md5sum $0 | cut -c -32) ]];then