mirror of
https://github.com/byReqz/stocheck.git
synced 2024-11-22 06:41:14 +00:00
added new args, fixed error when drive isnt properly responding, adjusted formatting
This commit is contained in:
parent
581c50a954
commit
9dfdedef94
59
stocheck.sh
59
stocheck.sh
@ -71,9 +71,9 @@ while [ -z "$1" ]; do
|
||||
echo "=== sata drive check: ($(ls -l /sys/block | grep sd | wc -l) found) ==="
|
||||
for x in {a..z};do
|
||||
scan=$(smartctl --scan)
|
||||
if [[ -n $(echo $scan | grep /dev/sd$x) ]];then
|
||||
argsl=$(smartctl -A /dev/sd$x | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -o --color=never)
|
||||
argse=$(smartctl -A /dev/sd$x | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW" --color=never)
|
||||
if [[ -n $(echo $scan | grep /dev/sd$x) ]] && [[ -n $(ls /sys/block | grep sd"$x") ]];then
|
||||
argsl=$(smartctl -A /dev/sd$x | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -o --color=never)
|
||||
argse=$(smartctl -A /dev/sd$x | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -e "FAILING_NOW" --color=never)
|
||||
if [[ "$argse" =~ "FAILING_NOW" ]];then
|
||||
argsl="
|
||||
"$argsl"
|
||||
@ -81,7 +81,7 @@ while [ -z "$1" ]; do
|
||||
"
|
||||
fi
|
||||
argsm=$(echo "$argsl" | wc -l)
|
||||
echo "------------------- /dev/sd$x --------------------"
|
||||
echo "------------------- /dev/sd"$x" --------------------"
|
||||
smartctl -i /dev/sd$x | grep -e "=== START OF INFORMATION SECTION ===" -e "Device Model:" -e "Serial Number:" -e "Firmware Version:" -e "User Capacity:" -e "SMART support is:" -e "Sector Size:" -e "Rotation Rate:" -e "Multi_Zone_Error_Rate"
|
||||
echo ""
|
||||
echo "=== START OF SELF-ASSESSMENT TEST RESULT ==="
|
||||
@ -97,9 +97,13 @@ while [ -z "$1" ]; do
|
||||
updated=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 8)
|
||||
failed=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 9)
|
||||
raw=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 10)
|
||||
printf "%-25s %s " "$arg" "$value" && printf "%-10s %s " "($raw)" "$worst" && printf "%-14s %s " " $thresh" "$type" && printf "%-10s %s " " $updated" "$failed" && printf "\n"
|
||||
printf "%-25s %s " "$arg" "$value" && printf "%-10s %s " "($raw)" "$worst" && printf " $thresh" && printf "%-16s %s " " $type" "$updated" && printf " $failed" && printf "\n"
|
||||
done
|
||||
echo "-------------------------------------------------"
|
||||
elif [[ -z $(echo $scan | grep /dev/sd"$x") ]] && [[ -n $(ls /sys/block | grep sd"$x") ]];then
|
||||
echo "------------------- /dev/sd"$x" --------------------"
|
||||
echo -e "drive is not responding"
|
||||
echo "-------------------------------------------------"
|
||||
else
|
||||
exit
|
||||
fi
|
||||
@ -112,9 +116,9 @@ while [ -z "$1" ]; do
|
||||
echo "=== nvme drive check: ($(ls -l /sys/block | grep nvme | wc -l) found) ==="
|
||||
for x in {0..4};do
|
||||
scan=$(smartctl --scan)
|
||||
if [[ -n $(echo $scan | grep /dev/nvme$x) ]];then
|
||||
argsl=$(smartctl -A /dev/nvme$x | grep -e "=== START OF READ SMART DATA SECTION ===" -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -o --color=never)
|
||||
argse=$(smartctl -A /dev/nvme$x | grep -e "=== START OF READ SMART DATA SECTION ===" -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW" --color=never)
|
||||
if [[ -n $(echo $scan | grep /dev/nvme$x) ]] && [[ -n $(ls /sys/block | grep nvme"$x") ]];then
|
||||
argsl=$(smartctl -A /dev/nvme$x | grep -e "=== START OF READ SMART DATA SECTION ===" -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -o --color=never)
|
||||
argse=$(smartctl -A /dev/nvme$x | grep -e "=== START OF READ SMART DATA SECTION ===" -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" --color=never)
|
||||
if [[ "$argse" =~ "FAILING_NOW" ]];then
|
||||
argsl="
|
||||
"$argsl"
|
||||
@ -138,9 +142,13 @@ while [ -z "$1" ]; do
|
||||
updated=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 8)
|
||||
failed=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 9)
|
||||
raw=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 10)
|
||||
printf "%-25s %s " "$arg" "$value" && printf "%-10s %s " "($raw)" "$worst" && printf "%-14s %s " " $thresh" "$type" && printf "%-10s %s " " $updated" "$failed" && printf "\n"
|
||||
printf "%-25s %s " "$arg" "$value" && printf "%-10s %s " "($raw)" "$worst" && printf " $thresh" && printf "%-16s %s " " $type" "$updated" && printf " $failed" && printf "\n"
|
||||
done
|
||||
echo "---------------------------------------------------"
|
||||
elif [[ -z $(echo $scan | grep /dev/nvme"$x") ]] && [[ -n $(ls /sys/block | grep nvme"$x") ]];then
|
||||
echo "------------------- /dev/nvme"$x" --------------------"
|
||||
echo -e "drive is not responding"
|
||||
echo "-------------------------------------------------"
|
||||
fi
|
||||
done
|
||||
if [[ -z $(ls /dev | grep sd) ]];then
|
||||
@ -165,8 +173,8 @@ while [ -z "$1" ]; do
|
||||
echo "=== sata drive check: ==="
|
||||
for x in {0..20};do
|
||||
if [[ -n $(echo $dreiwaredrives | grep p$x) ]];then
|
||||
argsl=$(smartctl -A -d 3ware,p$x /dev/twe0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -o --color=never)
|
||||
argse=$(smartctl -A -d 3ware,p$x /dev/twe0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW" --color=never)
|
||||
argsl=$(smartctl -A -d 3ware,p$x /dev/twe0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -o --color=never)
|
||||
argse=$(smartctl -A -d 3ware,p$x /dev/twe0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" --color=never)
|
||||
if [[ "$argse" =~ "FAILING_NOW" ]];then
|
||||
argsl="
|
||||
"$argsl"
|
||||
@ -190,10 +198,9 @@ while [ -z "$1" ]; do
|
||||
updated=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 8)
|
||||
failed=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 9)
|
||||
raw=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 10)
|
||||
printf "%-25s %s " "$arg" "$value" && printf "%-10s %s " "($raw)" "$worst" && printf "%-14s %s " " $thresh" "$type" && printf "%-10s %s " " $updated" "$failed" && printf "\n"
|
||||
printf "%-25s %s " "$arg" "$value" && printf "%-10s %s " "($raw)" "$worst" && printf " $thresh" && printf "%-16s %s " " $type" "$updated" && printf " $failed" && printf "\n"
|
||||
done
|
||||
echo "-------------------------------------------"
|
||||
else
|
||||
exit
|
||||
fi
|
||||
done
|
||||
@ -204,8 +211,8 @@ while [ -z "$1" ]; do
|
||||
echo "=== sata drive check: ==="
|
||||
for x in {0..20};do
|
||||
if [[ -n $(echo $dreiwaredrives | grep p$x) ]];then
|
||||
argsl=$(smartctl -A -d 3ware,p$x /dev/twa0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -o --color=never)
|
||||
argse=$(smartctl -A -d 3ware,p$x /dev/twa0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW" --color=never)
|
||||
argsl=$(smartctl -A -d 3ware,p$x /dev/twa0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -o --color=never)
|
||||
argse=$(smartctl -A -d 3ware,p$x /dev/twa0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" --color=never)
|
||||
if [[ "$argse" =~ "FAILING_NOW" ]];then
|
||||
argsl="
|
||||
"$argsl"
|
||||
@ -229,7 +236,7 @@ while [ -z "$1" ]; do
|
||||
updated=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 8)
|
||||
failed=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 9)
|
||||
raw=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 10)
|
||||
printf "%-25s %s " "$arg" "$value" && printf "%-10s %s " "($raw)" "$worst" && printf "%-14s %s " " $thresh" "$type" && printf "%-10s %s " " $updated" "$failed" && printf "\n"
|
||||
printf "%-25s %s " "$arg" "$value" && printf "%-10s %s " "($raw)" "$worst" && printf " $thresh" && printf "%-16s %s " " $type" "$updated" && printf " $failed" && printf "\n"
|
||||
done
|
||||
echo "-------------------------------------------"
|
||||
else
|
||||
@ -243,8 +250,8 @@ while [ -z "$1" ]; do
|
||||
echo "=== sata drive check: ==="
|
||||
for x in {0..20};do
|
||||
if [[ -n $(echo $dreiwaredrives | grep p$x) ]];then
|
||||
argsl=$(smartctl -A -d 3ware,p$x /dev/twl0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -o --color=never)
|
||||
argse=$(smartctl -A -d 3ware,p$x /dev/twl0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW" --color=never)
|
||||
argsl=$(smartctl -A -d 3ware,p$x /dev/twl0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -o --color=never)
|
||||
argse=$(smartctl -A -d 3ware,p$x /dev/twl0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -e "FAILING_NOW" --color=never)
|
||||
if [[ "$argse" =~ "FAILING_NOW" ]];then
|
||||
argsl="
|
||||
"$argsl"
|
||||
@ -268,7 +275,7 @@ while [ -z "$1" ]; do
|
||||
updated=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 8)
|
||||
failed=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 9)
|
||||
raw=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 10)
|
||||
printf "%-25s %s " "$arg" "$value" && printf "%-10s %s " "($raw)" "$worst" && printf "%-14s %s " " $thresh" "$type" && printf "%-10s %s " " $updated" "$failed" && printf "\n"
|
||||
printf "%-25s %s " "$arg" "$value" && printf "%-10s %s " "($raw)" "$worst" && printf " $thresh" && printf "%-16s %s " " $type" "$updated" && printf " $failed" && printf "\n"
|
||||
done
|
||||
echo "-------------------------------------------"
|
||||
else
|
||||
@ -293,8 +300,8 @@ while [ -z "$1" ]; do
|
||||
if [[ $yn == "y" ]] || [[ $yn == "Y" ]] || [[ $yn == "yes" ]];then
|
||||
for x in {1..20};do
|
||||
if [[ -n $(echo $dreiwaredrives | grep p$x) ]];then
|
||||
argsl=$(smartctl -A -d sat /dev/sg$x | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -o --color=never)
|
||||
argse=$(smartctl -A -d sat /dev/sg$x | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW" --color=never)
|
||||
argsl=$(smartctl -A -d sat /dev/sg$x | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -o --color=never)
|
||||
argse=$(smartctl -A -d sat /dev/sg$x | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" --color=never)
|
||||
if [[ "$argse" =~ "FAILING_NOW" ]];then
|
||||
argsl="
|
||||
"$argsl"
|
||||
@ -318,7 +325,7 @@ while [ -z "$1" ]; do
|
||||
updated=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 8)
|
||||
failed=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 9)
|
||||
raw=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 10)
|
||||
printf "%-25s %s " "$arg" "$value" && printf "%-10s %s " "($raw)" "$worst" && printf "%-14s %s " " $thresh" "$type" && printf "%-10s %s " " $updated" "$failed" && printf "\n"
|
||||
printf "%-25s %s " "$arg" "$value" && printf "%-10s %s " "($raw)" "$worst" && printf " $thresh" && printf "%-16s %s " " $type" "$updated" && printf " $failed" && printf "\n"
|
||||
done
|
||||
echo "-------------------------------------------"
|
||||
else
|
||||
@ -344,9 +351,9 @@ while [ -z "$1" ]; do
|
||||
p1=$(head -n 1 $scan | cut -c 12-)
|
||||
pz=$(tail -n 1 $scan | cut -c 12-)
|
||||
for x in {$p1..$pz};do
|
||||
if [[ -n $(echo $scan | grep -E "$x") ]];then
|
||||
argsl=$(smartctl -A -d sat+megaraid,$x /dev/sda | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -o --color=never)
|
||||
argse=$(smartctl -A -d sat+megaraid,$x /dev/sda | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW" --color=never)
|
||||
if [[ -n $(echo $scan | grep -E "$x") ]] && [[ -n $(ls /sys/block | grep "$x") ]];then
|
||||
argsl=$(smartctl -A -d sat+megaraid,$x /dev/sda | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" -o --color=never)
|
||||
argse=$(smartctl -A -d sat+megaraid,$x /dev/sda | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW" -e "Percent_Lifetime_Remain" -e "Write_Error_Rate" -e "Offline_Uncorrectable" -e "Reported_Uncorrect" -e "Error_Correction_Count" -e "Unexpect_Power_Loss_Ct" -e "Raw_Read_Error_Rate" --color=never)
|
||||
if [[ "$argse" =~ "FAILING_NOW" ]];then
|
||||
argsl="
|
||||
"$argsl"
|
||||
@ -370,7 +377,7 @@ while [ -z "$1" ]; do
|
||||
updated=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 8)
|
||||
failed=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 9)
|
||||
raw=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 10)
|
||||
printf "%-25s %s " "$arg" "$value" && printf "%-10s %s " "($raw)" "$worst" && printf "%-14s %s " " $thresh" "$type" && printf "%-10s %s " " $updated" "$failed" && printf "\n"
|
||||
printf "%-25s %s " "$arg" "$value" && printf "%-10s %s " "($raw)" "$worst" && printf " $thresh" && printf "%-16s %s " " $type" "$updated" && printf " $failed" && printf "\n"
|
||||
done
|
||||
echo "-------------------------------------------------"
|
||||
else
|
||||
|
Loading…
Reference in New Issue
Block a user