1
0
mirror of https://github.com/byReqz/stocheck.git synced 2024-11-14 11:43:15 +00:00

added fancy attribute parsing

This commit is contained in:
Nils 2021-03-17 17:43:11 +01:00
parent a2c5ec0ec5
commit cb6e43a724
Signed by: byreqz
GPG Key ID: 396A62D7D436749E

View File

@ -72,13 +72,31 @@ while [ -z "$1" ]; do
for x in {a..z};do
scan=$(smartctl --scan)
if [[ -n $(echo $scan | grep /dev/sd$x) ]];then
argsl=$(smartctl -A /dev/sd$x | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -o --color=never)
argse=$(smartctl -A /dev/sd$x | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW" --color=never)
argsl="
$argsl
$(echo $argse | grep -e "FAILING_NOW" | tr -s ' ' | cut -c 2- | cut -d ' ' -f 2)
"
argsm=$(echo "$argsl" | wc -l)
echo "------------------- /dev/sd$x --------------------"
smartctl -i /dev/sd$x | grep -e "=== START OF INFORMATION SECTION ===" -e "Device Model:" -e "Serial Number:" -e "Firmware Version:" -e "User Capacity:" -e "SMART support is:" -e "Sector Size:" -e "Rotation Rate:" -e "Multi_Zone_Error_Rate"
echo ""
echo "=== START OF SELF-ASSESSMENT TEST RESULT ==="
smartctl -H /dev/sd$x | grep -e "SMART overall-health self-assessment test result:"
echo ""
smartctl -A /dev/sd$x | grep -e "=== START OF READ SMART DATA SECTION ===" -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Current_Pending_Sector:" -e "Offline_Uncorrectable:" -e "Raw_Read_Error_Rate:" -e "Seek_Error_Rate:" -e "Spin_Retry_Count:" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "FAILING_NOW"
echo -e "\e[4mAttribute\e[0m \e[4mValue (Raw)\e[0m \e[4mWorst\e[0m \e[4mType\e[0m \e[4mUpdated\e[0m \e[4mFailed\e[0m"
for ((z=1;z<=argsm;z++)); do
arg=$(echo "$argsl" | sed -n "$z"p)
value=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 4)
worst=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 5)
thresh=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 6)
type=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 7)
updated=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 8)
failed=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 9)
raw=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 10)
printf "%-25s %s " "$arg" "$value" && printf "%-10s %s " "($raw)" "$worst" && printf " $type" && printf "%-10s %s " " $updated" "$failed" && printf "\n"
done
echo "-------------------------------------------------"
else
exit
@ -93,13 +111,31 @@ while [ -z "$1" ]; do
for x in {0..4};do
scan=$(smartctl --scan)
if [[ -n $(echo $scan | grep /dev/nvme$x) ]];then
argsl=$(smartctl -A /dev/nvme$x | grep -e "=== START OF READ SMART DATA SECTION ===" -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -o --color=never)
argse=$(smartctl -A /dev/nvme$x | grep -e "=== START OF READ SMART DATA SECTION ===" -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW" --color=never)
argsl="
$argsl
$(echo $argse | grep -e "FAILING_NOW" | tr -s ' ' | cut -c 2- | cut -d ' ' -f 2)
"
argsm=$(echo "$argsl" | wc -l)
echo "------------------- /dev/nvme$x --------------------"
smartctl -i /dev/nvme$x | grep -e "=== START OF INFORMATION SECTION ===" -e "Device Model:" -e "Serial Number:" -e "Firmware Version:" -e "User Capacity:" -e "SMART support is:" -e "Sector Size:" -e "Rotation Rate:" -e "Multi_Zone_Error_Rate" -e "Model Number:" -e "Total NVM Capacity:" -e "Namespace 1 Utilization"
echo ""
echo "=== START OF SELF-ASSESSMENT TEST RESULT ==="
smartctl -H /dev/nvme$x | grep -e "SMART overall-health self-assessment test result:"
echo ""
smartctl -A /dev/nvme$x | grep -e "=== START OF READ SMART DATA SECTION ===" -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW"
echo -e "\e[4mAttribute\e[0m \e[4mValue (Raw)\e[0m \e[4mWorst\e[0m \e[4mType\e[0m \e[4mUpdated\e[0m \e[4mFailed\e[0m"
for ((z=1;z<=argsm;z++)); do
arg=$(echo "$argsl" | sed -n "$z"p)
value=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 4)
worst=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 5)
thresh=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 6)
type=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 7)
updated=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 8)
failed=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 9)
raw=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 10)
printf "%-25s %s " "$arg" "$value" && printf "%-10s %s " "($raw)" "$worst" && printf " $type" && printf "%-10s %s " " $updated" "$failed" && printf "\n"
done
echo "---------------------------------------------------"
fi
done
@ -125,13 +161,31 @@ while [ -z "$1" ]; do
echo "=== sata drive check: ==="
for x in {0..20};do
if [[ -n $(echo $dreiwaredrives | grep p$x) ]];then
argsl=$(smartctl -A -d 3ware,p$x /dev/twe0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -o --color=never)
argse=$(smartctl -A -d 3ware,p$x /dev/twe0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW" --color=never)
argsl="
$argsl
$(echo $argse | grep -e "FAILING_NOW" | tr -s ' ' | cut -c 2- | cut -d ' ' -f 2)
"
argsm=$(echo "$argsl" | wc -l)
echo "------------------- p$x --------------------"
smartctl -i -d 3ware,p$x /dev/twe0 | grep -e "=== START OF INFORMATION SECTION ===" -e "Device Model:" -e "Serial Number:" -e "Firmware Version:" -e "User Capacity:" -e "SMART support is:" -e "Sector Size:" -e "Rotation Rate:" -e "Multi_Zone_Error_Rate"
echo ""
echo "=== START OF SELF-ASSESSMENT TEST RESULT ==="
smartctl -H -d 3ware,p$x /dev/twe0 | grep -e "SMART overall-health self-assessment test result:"
echo ""
smartctl -A -d 3ware,p$x /dev/twe0 | grep -e "=== START OF READ SMART DATA SECTION ===" -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect"
echo -e "\e[4mAttribute\e[0m \e[4mValue (Raw)\e[0m \e[4mWorst\e[0m \e[4mType\e[0m \e[4mUpdated\e[0m \e[4mFailed\e[0m"
for ((z=1;z<=argsm;z++)); do
arg=$(echo "$argsl" | sed -n "$z"p)
value=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 4)
worst=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 5)
thresh=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 6)
type=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 7)
updated=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 8)
failed=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 9)
raw=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 10)
printf "%-25s %s " "$arg" "$value" && printf "%-10s %s " "($raw)" "$worst" && printf " $type" && printf "%-10s %s " " $updated" "$failed" && printf "\n"
done
echo "-------------------------------------------"
else
exit
@ -144,13 +198,31 @@ while [ -z "$1" ]; do
echo "=== sata drive check: ==="
for x in {0..20};do
if [[ -n $(echo $dreiwaredrives | grep p$x) ]];then
argsl=$(smartctl -A -d 3ware,p$x /dev/twa0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -o --color=never)
argse=$(smartctl -A -d 3ware,p$x /dev/twa0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW" --color=never)
argsl="
$argsl
$(echo $argse | grep -e "FAILING_NOW" | tr -s ' ' | cut -c 2- | cut -d ' ' -f 2)
"
argsm=$(echo "$argsl" | wc -l)
echo "------------------- p$x --------------------"
smartctl -i -d 3ware,p$x /dev/twa0 | grep -e "=== START OF INFORMATION SECTION ===" -e "Device Model:" -e "Serial Number:" -e "Firmware Version:" -e "User Capacity:" -e "SMART support is:" -e "Sector Size:" -e "Rotation Rate:" -e "Multi_Zone_Error_Rate"
echo ""
echo "=== START OF SELF-ASSESSMENT TEST RESULT ==="
smartctl -H -d 3ware,p$x /dev/twa0 | grep -e "SMART overall-health self-assessment test result:"
echo ""
smartctl -A -d 3ware,p$x /dev/twa0 | grep -e "=== START OF READ SMART DATA SECTION ===" -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect"
echo -e "\e[4mAttribute\e[0m \e[4mValue (Raw)\e[0m \e[4mWorst\e[0m \e[4mType\e[0m \e[4mUpdated\e[0m \e[4mFailed\e[0m"
for ((z=1;z<=argsm;z++)); do
arg=$(echo "$argsl" | sed -n "$z"p)
value=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 4)
worst=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 5)
thresh=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 6)
type=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 7)
updated=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 8)
failed=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 9)
raw=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 10)
printf "%-25s %s " "$arg" "$value" && printf "%-10s %s " "($raw)" "$worst" && printf " $type" && printf "%-10s %s " " $updated" "$failed" && printf "\n"
done
echo "-------------------------------------------"
else
exit
@ -163,13 +235,31 @@ while [ -z "$1" ]; do
echo "=== sata drive check: ==="
for x in {0..20};do
if [[ -n $(echo $dreiwaredrives | grep p$x) ]];then
argsl=$(smartctl -A -d 3ware,p$x /dev/twl0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -o --color=never)
argse=$(smartctl -A -d 3ware,p$x /dev/twl0 | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW" --color=never)
argsl="
$argsl
$(echo $argse | grep -e "FAILING_NOW" | tr -s ' ' | cut -c 2- | cut -d ' ' -f 2)
"
argsm=$(echo "$argsl" | wc -l)
echo "------------------- p$x --------------------"
smartctl -i -d 3ware,p$x /dev/twl0 | grep -e "=== START OF INFORMATION SECTION ===" -e "Device Model:" -e "Serial Number:" -e "Firmware Version:" -e "User Capacity:" -e "SMART support is:" -e "Sector Size:" -e "Rotation Rate:" -e "Multi_Zone_Error_Rate"
echo ""
echo "=== START OF SELF-ASSESSMENT TEST RESULT ==="
smartctl -H -d 3ware,p$x /dev/twl0 | grep -e "SMART overall-health self-assessment test result:"
echo ""
smartctl -A -d 3ware,p$x /dev/twl0 | grep -e "=== START OF READ SMART DATA SECTION ===" -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect"
echo -e "\e[4mAttribute\e[0m \e[4mValue (Raw)\e[0m \e[4mWorst\e[0m \e[4mType\e[0m \e[4mUpdated\e[0m \e[4mFailed\e[0m"
for ((z=1;z<=argsm;z++)); do
arg=$(echo "$argsl" | sed -n "$z"p)
value=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 4)
worst=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 5)
thresh=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 6)
type=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 7)
updated=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 8)
failed=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 9)
raw=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 10)
printf "%-25s %s " "$arg" "$value" && printf "%-10s %s " "($raw)" "$worst" && printf " $type" && printf "%-10s %s " " $updated" "$failed" && printf "\n"
done
echo "-------------------------------------------"
else
exit
@ -193,13 +283,31 @@ while [ -z "$1" ]; do
if [[ $yn == "y" ]] || [[ $yn == "Y" ]] || [[ $yn == "yes" ]];then
for x in {1..20};do
if [[ -n $(echo $dreiwaredrives | grep p$x) ]];then
argsl=$(smartctl -A -d sat /dev/sg$x | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -o --color=never)
argse=$(smartctl -A -d sat /dev/sg$x | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW" --color=never)
argsl="
$argsl
$(echo $argse | grep -e "FAILING_NOW" | tr -s ' ' | cut -c 2- | cut -d ' ' -f 2)
"
argsm=$(echo "$argsl" | wc -l)
echo "------------------- sg$x --------------------"
smartctl -i -d sat /dev/sg$x | grep -e "=== START OF INFORMATION SECTION ===" -e "Device Model:" -e "Serial Number:" -e "Firmware Version:" -e "User Capacity:" -e "SMART support is:" -e "Sector Size:" -e "Rotation Rate:" -e "Multi_Zone_Error_Rate"
echo ""
echo "=== START OF SELF-ASSESSMENT TEST RESULT ==="
smartctl -H -d sat /dev/sg$x | grep -e "SMART overall-health self-assessment test result:"
echo ""
smartctl -A -d sat /dev/sg$x | grep -e "=== START OF READ SMART DATA SECTION ===" -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect"
echo -e "\e[4mAttribute\e[0m \e[4mValue (Raw)\e[0m \e[4mWorst\e[0m \e[4mType\e[0m \e[4mUpdated\e[0m \e[4mFailed\e[0m"
for ((z=1;z<=argsm;z++)); do
arg=$(echo "$argsl" | sed -n "$z"p)
value=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 4)
worst=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 5)
thresh=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 6)
type=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 7)
updated=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 8)
failed=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 9)
raw=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 10)
printf "%-25s %s " "$arg" "$value" && printf "%-10s %s " "($raw)" "$worst" && printf " $type" && printf "%-10s %s " " $updated" "$failed" && printf "\n"
done
echo "-------------------------------------------"
else
exit
@ -225,13 +333,31 @@ while [ -z "$1" ]; do
pz=$(tail -n 1 $scan | cut -c 12-)
for x in {$p1..$pz};do
if [[ -n $(echo $scan | grep -E "$x") ]];then
argsl=$(smartctl -A -d sat+megaraid,$x /dev/sda | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -o --color=never)
argse=$(smartctl -A -d sat+megaraid,$x /dev/sda | grep -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect" -e "Temperature:" -e "Percentage Used:" -e "Data Units Read:" -e "Data Units Written:" -e "Power on Hours:" -e "Power Cycles:" -e "Media and Data Integrity Errors:" -e "Error Information Log Entries:" -e "Error Information" -e "No Errors Logged" -e "FAILING_NOW" --color=never)
argsl="
$argsl
$(echo $argse | grep -e "FAILING_NOW" | tr -s ' ' | cut -c 2- | cut -d ' ' -f 2)
"
argsm=$(echo "$argsl" | wc -l)
echo "------------------- p$x --------------------"
smartctl -i -d sat+megaraid,$x /dev/sda | grep -e "=== START OF INFORMATION SECTION ===" -e "Device Model:" -e "Serial Number:" -e "Firmware Version:" -e "User Capacity:" -e "SMART support is:" -e "Sector Size:" -e "Rotation Rate:" -e "Multi_Zone_Error_Rate"
echo ""
echo "=== START OF SELF-ASSESSMENT TEST RESULT ==="
smartctl -H -d sat+megaraid,$x /dev/sda | grep -e "SMART overall-health self-assessment test result:"
echo ""
smartctl -A -d sat+megaraid,$x /dev/sda | grep -e "=== START OF READ SMART DATA SECTION ===" -e "SMART overall-health self-assessment test result:" -e "Reallocated_Sector_Ct" -e "Power_On_Hours" -e "Temperature_Celsius" -e "Media_Wearout_Indicator" -e "Power_Cycle_Count" -e "Reported_Uncorrect"
echo -e "\e[4mAttribute\e[0m \e[4mValue (Raw)\e[0m \e[4mWorst\e[0m \e[4mType\e[0m \e[4mUpdated\e[0m \e[4mFailed\e[0m"
for ((z=1;z<=argsm;z++)); do
arg=$(echo "$argsl" | sed -n "$z"p)
value=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 4)
worst=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 5)
thresh=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 6)
type=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 7)
updated=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 8)
failed=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 9)
raw=$(echo "$argse" | grep -e "$arg" | xargs | cut -d ' ' -f 10)
printf "%-25s %s " "$arg" "$value" && printf "%-10s %s " "($raw)" "$worst" && printf " $type" && printf "%-10s %s " " $updated" "$failed" && printf "\n"
done
echo "-------------------------------------------------"
else
exit